Auto name |
Factory |
Options |
Tuning |
Factory |
Options |
Tuning |

For an example of size: PCD Dia 0 , consider the notation for these parameters.
- width - or J means the width of the disk shelves in inches

- diameter - or R is the installation of the wheel size in inches

- Between the bolt distance (PCD) and number of holes - means holes with a distance of .

- Et (ET) - or ET is the distance from the geometric center of the disk shelf to the fitting point to the hub in millimeters. The smaller the flyout, the more the drive is out

- Dia -0 the size of the hub in millimeters. Sometimes indicated without a fractional part

- Bolt - diameter and thread pitch of the bolt / nut in millimeters

Using the wheel size example , consider what these options mean.
- Width - - tire width in millimeters

- Height - - this value is specified in percent. The height of the wheel profile in millimeters is calculated as a percentage of the width, for our case this will be * & # 37; = mm

- Diameter - or R - tire setting diameter